Concrete Floor Repair

There are many reasons such as repair would have a concrete floor:

Cracks made by expansion and contraction of the floor
Damage done by the defect before the concrete has cured
or floating objects such as wood, which can be dropped into the concrete while it is still wet.

Whatever, it must be done to repair the concrete floor causes.

To begin to repair the concrete floor repair with a ruler to the map of the area.If the area is small and flat, then a small area may be the only repair what is necessary. On the other hand, if the area is repair of considerable size, when the whole concrete floor will be lined out. Make a rough surface for the cement to bind it. Rough a small area you may only need a hammer, but if the region as a major jackhammer may be required. Clean the area you have all the chipping debris to have lined for the concrete to make a goodTo maintain surface. The sand and cement mixture, which should you use to fill the area of one part cement and two and a half parts of the masonry consists of sand. These materials should be dry mixed first.

Bring this dry mixture to a consistency of rigid plastic with a polymer or latex binders. Wet the area with clean water can be removed without flooding. The surface should be moist in order to bind the mixture. If the area is too dry for the patch to crack. Apply the patchwith a spatula, let it be a little higher to dry shrinking space and let him. After about an hour using a harder trowel on the paste, which will rise to the top spread. This paste is to do what the finished surface. When dry scrape off all the good than the use of the trowel everything can remain on the surface or may be distributed on the surface in the vicinity. Clean your tools thoroughly.

Hair Straightener how make money Merchant processing