Selecting a Paint garage floor


More often than not, the garage floor is the last thing that comes to mind in the projects, if you decide to renovate the house. But, seeing as the whole garage garage is used for storing lawn mowers, cars, and also offers a great place for kids to play in bad weather, the garage floor right of option to improve the appearance of color. In addition, it will cease to spoil the garage with oil, grease and other liquid stains, prolonging the life of > Plan and make it much easier to keep the garage coating the porous surface. Garage floors are usually concrete and not to any color can be used with success on this surface. The success of this project requires the selection of the best quality paint for the garage floor and adequate means of ground for the application of color.

The first step, the garage is the most difficult soilPainting is the removal of more leave blank the entire floor. This is when you realize how much you use your garage. After this, there are three key steps for the implementation of garage floor paint, including, cleaning, construction and painting, the cleaning process. The key, and must be done correctly or the paint will not bond to the concrete surface.

Use a pressure washer to clean everythingAfter sweeping the floor. When the floor has been sealed, it will be important for you to remove the seal with hydrochloric acid to etch the floor, let the color of the concrete for the note. This acid can be purchased from the same resin floor with the authority that the color and often comes with a set of. You should always be used according to instructions. Wear eye protection, since it is an acid, but is a weak,and can cause problems when sprayed in the eyes.

It 's very important to choose the right color of the garage floor. Plans only choose to paint on the garage floor is designated. Acrylic and epoxy are the only two types that the sustainability of supply. Latex is the easiest to use and requires only a clean ground without the need for more etching. But do not wear latex well and require at least two layers. Acrylic takeslong time, but requires a primer sealer and one of the rule.

Epoxy is harder than latex and acrylic and has the same moisture content control, but it is difficult to apply. Epoxy needs all the purification steps for success, including the acid-etching. In addition, epoxy paint must be mixed well when the catalyst and resin are combined. If you want to mix, not really, the floor will end up with lumps that are not very attractive and quite pull off. But the realitygood thing about this kind of color chips is the ability to add color to an exceptional finish. These chips allow two-tone color and also give very good traction when the ground is wet.

coffee table

Danos tu comentario