Preparing the concrete surface for painting and poetry

Good preparation is important for any remodeling job, and with art, it is very true. When working with concrete, it can be even more important, the application of paint properly maintain and will not cause problems later. Preparation is a bit boring, and for those who may be impatient time work in order to rush through them, but you will regret it later when you are not careful about the details. This article will describe some of the most important steps when it comes toPreparation and painting your concrete surface.

Concrete floors are also sometimes left alone in peace, but in some areas you will want them done to look like in an upscale store, or even a covered area of laundry.

To start, ensure that your floor completely clean off all dirt, then return and / or vacuum it well. If necessary, clean all grease and contaminants with the appropriate cleaning solutions. To keep the color right, you need concreteroughened in order there will be a little, so as etching. Be careful, well-ventilated areas, or at least, if have no protective respirators when no ventilation. Also gloves and masks. The material for the etching is non-corrosive and corrosive. It is a hydrochloric acid and water mixture of 3 parts water, 1 part acid. Scrub the floor with this solution. Leave it until it stops bubbling, then rinse it completely with clean water. Remove all puddles and allow to dry.It should dry in a few hours, if not, rinse it again very good and wait for completely dry.

Now you can paint your concrete. If the image is complete and it is dry you can apply your concrete sealer to make it fresh and increase the longevity and durability.

office chair how make money use stock