Painting a door like an expert

Is the idea of painting to deter a door. The last time you tried to paint a door at the end, it has run with uneven color. If so, you need the instructions that I will follow. This leave you with a perfectly finished painted door. Nothing in life is hard when you know how to do it. Painting a door is no different.

We will follow with instructions to paint a paneled door.

Gather the tools you need. A screwdriver to remove thedoor furniture. Paint, 2 "brush. 3" roller and tray, cloth, turpentine or white spirits, and sandpaper. small hand brush, floor coverings, doors to stop.

Lay the floor under the door so that both sides of the soil must be protected. Chock the door with a door stop so that it remains stable while you paint. ~ Remove the door furniture. Use the sandpaper, and so smoothly over the surface of the door to any old drip marks, brush hair, until theDoor has a smooth surface. Brush on lightly to remove sanding residue.

Place the tray with rolls undercoat, but only halfway. Work the roller in the paint and roll-out on the tray. The goal is to take place at least as possible. Many people make the mistake of loading up brushes and rollers, which then patchiness and / or color is running.

Take the tin of undercoat and the 2 "brush. Dip the brush into the paint, but not more thanhalfway up the brush. You now need to wipe the excess paint from the brush on the side of the can. Use the same side of the box the whole time. Apply the color transferred to the parts of the door trim as much space as possible with the paint on the brush. Pay attention to the corners by dabbing the edge of the brush into them and brushing. Leave all the flat areas of the door. These will be rolled up when you run into the fields filled.

Once the routing Areas are covered neatly, with a minimum of color, it takes time for the shallow areas of undercoat. Remove the rolls and dip into the paint, then turn over all of the excess paint on the tray .. the plates by the direction of the grain, mostly apart upward from the top down in the middle, middle middle and bottom of the middle. The pages are from top to bottom. Use the brush on the bottom few inches of the door and paint the area around all the hinges. Do> Paint the hinges. Roll on the side of the door.

Once the door painted it with all of 15 minutes or so to brush each run. Strictly speaking, if you apply the color fine enough, then it wont have any trouble with running.

Let dry for at least 24 hours.

Apply the second layer with high-gloss lacquer or satin. Follow the same routine as you would with the primer that keeps the brushes and rollers sparsely covered with paint. You should now have apainted door, you can be proud of and that only the cost of your own hours.

When the second coat is dry, replace the door furniture.

Hair Straightener Real estate training