Concrete Resurfacing
Using concrete in a variety of surfaces is now the preferred option for homeowners. This is because one of the largest concrete construction materials available on the market and is one of the easiest is to wait. However, certain factors like the weather can make the concrete more susceptible to wear and tear. An example of damages that may result due to poor weather conditions, scaling or flaking.
Scaling and flaking
Scaling is anResult of the freeze-thaw cycles, where frozen water seeps through the pores on the surface, remove the scales from the concrete surface or cause. Reduction usually results in the loss of about 1 / 8 "to 3 / 8" of the surface, which could be deep enough to expose the aggregate in the concrete surface. Other factors that may cause scaling and the use of non-air-entrained concrete, inadequate curing, application of calcium salts, deicing agents, and finishingConcrete while bleed water is still on the surface.
Resurfacing
To repair damage scaling or flaking, is one of the most profitable ways to the concrete resurface. This involves ensuring that before the new surface is put on the old, that the surface is free from oil, paint and dirt. Another important step is to ensure that the weak parts of the old surface is removed with a chisel, pneumatic drill or sand blasting. This is because the strength of the newSurface depends strongly on the strength of the base or the old surface, would be bound to them. As an additional pre-warning of scale, a different and better mix for the new surface to be used, and the new surface should be coated with concrete as a seal to prevent seepage of water.
Concrete is the preferred option for most homeowners for their building needs. This is mainly due to the relative strength of the material. However, a number of factors,the extreme weather conditions included, can make a concrete surface highly vulnerable to damage, such as scaling. Fortunately, there are a number of ways to repair such damage, which includes resurfacing of the concrete surface with better and more durable concrete.
Danos tu comentario
Post a Comment