How to apply epoxy paint

Epoxy is one of the strongest paints on concrete or basement floors, garage floors, workshop floors, showroom floors, laundry room floors and also in bars among other projects. The main reason these colors are used, their ability to resist the accumulation of pollutants, oil, grease and dirt, among many others. It also protects the soil from erosion and wear.

The process of applying epoxy > Painting begins with the preparation of your garage floor. Most failures epoxy coating that I experienced as a result of little surface preparation or wrong. First you need to clean the floor result in a stiff brush and then realized that the garbage is all. You also need to clean some mild acid used, and then scrub thoroughly. These are usually referred to as etching.

This is followed by washing of the concrete > Floor with hot soapy water and also clearing them away. But you can with some water soluble impurities, which is necessary with the help of a de-greaser by scrubbing it can be removed at the surface, then rinse with water. The mild acid is not removed fats and oils from garage floors. Ensure that the rinse water does not remain in the soil surface, if it sticks, then repeat the process all over greasing.

After these, in the garage> Plan should then be allowed to dry overnight. While the application of epoxy paint, it is important to ensure uniform application. You should also ensure that moisture will be accepted at the coating to prevent blistering and discoloration. Two to three coats are usually sufficient. If you have a successful installation of epoxy paints you a guarantee of years of service and if you regularly maintain the surface can see their life further.

cordlessryobi