The correct preparation of the floor staining concrete floors

If you love the look of concrete floors stains, do not hesitate to pull the rug under the grungy place concrete. But for those recently exposed soils are often very clean, so they can be decorated with acid stains. Pulling the rug, you never know, the floor could before ugly stains, carpet glue, drops of paint, and rust stains.

So if you are negligent in the process of cleaning, staining concrete> Head to the aspect. Any unpleasant residue on the soil probably emerge from the new patch applied. The concrete surface must be thoroughly washed and cleaned on several occasions. No nails or concrete wells must be left on the surface.

If you are going to dry concrete repair cracks or holes with fast, you must allow the strong places to dry completely before proceeding to the next step.

ColoringConcrete is an error-and-test method?

Finding the right cleaning products often involves a method of trial and error. You can not just always say, the appearance of concrete alone. What we can expect is a grease spot something else can be.

Next, you should read the label carefully to know which substances can read and remove the product. Acid solution formulated to strip stain may be ineffective to remove stubborn fat or oil. The label can alsoprovide valuable information that you need to know to work to its best performance.

While coloring the concrete floors, you get one, be extremely careful in the use of petroleum-based strippers, the fuel tends to be volatile organic compounds (VOCs) and can.

Precautions for the use of chemical strippers

Some chemical strippers can be considered extremely dangerous, especially if you work in an environment close. ReadSafety information for potential risks and impacts to monitor health. Petroleum products can be dangerous to use the machines to wash the floor, because the sparks could ignite explosions or electrical fires. If the chemical stripper used is not protected, you must dispose of it immediately.

Dye purification techniques

The methods used to clean the floor are as important as the products selected. ForAll-purpose cleaning and degreasing, you can sweep the floor and then wipe thoroughly. For laundry, or washing aggressive, must be a plan to remove glue, plaster and paint.

After using degreasers, strippers or other chemical cleaning agents, you must clean the floor again, remove any debris. After the final rinse, you can remove the safe use of industrial vacuum cleaner water for all water and dirt.

To AllOthers failed

You can verify that refuse deposits up to your best efforts to clean delivery. When scraping or chemical stripping are ineffective at removing adhesives, cements, or other severe contamination, you may need for mechanical removal methods, such as grinding Resort. While grinding your concrete should not be too aggressive as a dish can trace turbulence and cause stains to respond differently.

Check, thoroughly clean the concreteas possible before departure. If you take the time to seal your plan other stains can be removed easily in the future. Those who are interested in their instructions in this particular should look at "How to Stain Floors" advice and step by step.

kitchendesign barstoolshome