Tips to remove linoleum

When it was time, new flooring can save you money by removing the old floor to save themselves, but get you on your old linoleum floors could you quite a challenge. Depending on how old the linoleum and the type of adhesive that was used, it can be extremely difficult to get up.

Firstly, it is unlikely that you will find be able to remove just the linoleum and adhesive all at once. The surface under the linoleum and the damage it can cause, it must- considered especially if the surface is wood. concrete floors can be much more serious in the way of treatment. The type of scraper you have a lot to do with your success as well as the damage to the floor underneath. Many people use paint scrapers but make more efficient with a razor blade in the rule. Be willing to break some leaves when the glue is hard, and work on concrete.

Try cutting the linoleum into strips or sections rather thanremoving the whole piece at once. This makes it easier to pry up an edge. Of course, the linoleum is probably not come up in nice clean sections, so willing to stay with a lot of support, and much use glue, which is still attached to your floor.

One way to deal with the remains, which will not come easy, a kind of application of solvent or carrier. One popular brand is Krud Kutter, which seems very good from the customer feedback comments work. Follow the instructions on the labelregardless of product to employ and gloves to protect your hands. What is a small section at a time, and then to the next.

Another technique is the use of boiling water and pour it directly onto the backing material and adhesive. Let it soak and then scrape. If you do not want to use water, you can try to heat the glue with a hair dryer or heat gun. Choose a very inconspicuous place, such as behind a door in order to try it. Heating the adhesive with a hair dryer and scrape it with a straight-blade --Scraper (stiff) like a spatula with a beveled edge. Move the scraper in the direction of the grain of the wood if you discover a pit. Have a pan or other container handy to melt the particles in drops - one that it is unlikely either or ignite when in contact with hot material. Be very careful if you use a heat gun, as this can easily damage the floor underneath when wood.

If worse comes to worse, and you're with some stubborn adhesive on the left sideSoils, there may be time to sand. Of course, if you have your floors made of wood and you plan to refinish it, you have to sand anyway, but at this step you must take care not to the particular area by damage to the sander on it for too long.

When you finally linoleum and all traces of adhesive, you are ready, the land, as recommended for the type of floor covering and the application of the new floor as recommended seal!

Equity Home Line Circular Saw, Saw Blade Color printing