The concrete garage floor

Concrete is an outstanding product. It has been used for centuries dating back about 300 BC, although the reports that preceded the Roman use of concrete use this time to the first results have been effective. Ancient Rome had a lot of ash, lime and water, the most important ingredients. The architects who built the ancient city, and an advanced culture as the result. It could be argued that without concrete, we would simply continue to live in hisTents. The man would not be where we are now well advanced.

But concrete is not without flaws. The garage floor is a perfect example. Many houses were built with depancreatized. Depancreatized are precast concrete, typically 24 meters long, 3 feet wide and 6 cm thick. They have set up a foundation to house above the cellar. Then concrete is poured approximately 4 cm thick. The problem is that this top layer of concreteReduction plans that come right up depancreatized the plates together. In the main part of the house this is not a problem but a problem in the garage.

There are some forces at work, the headaches for a landlord are. Let us start with a crack in the concrete garage floor. When a car drives into drops of rain or snow on the surface makes its way into the slot with road salt. The salts in the concrete quickly eating outDecay. If you dropped a depancreatized under water in the basement. The result is a damp musty unhealthy. If the concrete is able, the cracks and water will make its way under the covers. Once it stops, pick up the disc, then is when it melts. This constant movement is not good.

Many attempts have been made over the years, and coating systems to create, in order to combat this problem. Like everything in the construction industry, there are right andfalse solutions. The obvious first option to fill any cracks in the concrete garage floor. But that should not be seen that the walls of the crack are probably wet. The reason is that concrete is porous. Surface water drips down into the crack of steam and water if the dish is from species to move up. The only crack filler that works, is a polyurea that is dry below the surface. Polyurea must be sufficiently liquid to the bottom of the riverCrack all in and fill the void surface. The filler wrong is never dry and will always muddy and wet. Unless this crucial step is done right, can never solve the problem.

The coatings are a natural solution to current events, but very few work. If the garage is properly prepared and applied epoxy expensive, you run the risk of fractures. You can see chipping and delamination have epoxy coatings. Sometimes they are used improperly or not of high quality. Withall factors in the workplace that can cause problems only the highest quality of a chance.

In recent years, advanced technology and polyaspartic polyurea products are designed to handle the most demanding conditions. However, not all mixtures are equal and not every application has the necessary knowledge or equipment to handle these blends high performance exotic.

The correct procedure is to grind the surface of the concrete removal of all switches bond potential and the openingThe pores of the surface. The new concrete products Pure Bred actually absorb into the top layer of the locks and when it is dry. This is the part of the coating of concrete not only attached to the surface.

Because the layers are applied, usually has a total of 3-4 layers, with particles of anti-slip for each layer of a highly durable surface. That seems hopeless plans can also be restored showroom condition and is the implementation oflong-term. It is not only the right polyureas, but those in the hands of a professional. Of course, your qualified as a professional with experience and how do you know that you have set correctly? That's for another article.

Log Cabin Home