Painting Tips - How to Strip Paint
Stripping is one of the tasks to do it yourself love to hate. It is tedious, time consuming and just hard work. Fortunately, there are some tools available that will make it easier to work.
Your first weapon is a chemical paint stripper, paint, especially for stubborn layers of older ones. There are many brands available stripping compounds that serve very effective and easy to use. Be sure to wear protective clothing when;Rubber gloves, long sleeves and long pants and glasses are a must. Avoid Spread newspaper or plastic sheeting on the surrounding area does not spill over as well.
With an old brush, a liberal layer of stripper compound is applied, and left, the manufacturer's instructions, soft to the paint. Then with a knife or a paint stripper hook tool, scraping the paint to shaving is relatively simple. When all the paint was removed (and I mean everything,Do not be lazy here), clean the wood, leaving neutralized with cold water or paint thinner that the chemicals contained in the stripper.
Electric distempers
Another tool in your arsenal is the electric paint removers. This is a handy little tool that scratching has an integral heating element. The element is heated when turning on and hold the tool at a certain distance from the color, smooth it on. I think this tool is more suitable forsmall sections of real stubborn color as for large areas.
Blow Torch
If all else fails, the gas or kerosene blowtorch works wonders. Only exercise extreme caution if you are one of these bad boys. All combustible material must be removed from the immediate vicinity. Burning paint chips are falling down all over the place, so keep an eye on and ensure that they delete them immediately. Moreover, it is easy to burn the underlying wood, so never hold the torch in aPlace too long, they keep moving. You try to melt soft and the color does not burn your house.
Blow torches are usually only for total stripping, which severely damaged layers of paint must be used to remove all the way into the forest. They are also beautiful molding and tendrils, which has obscured used by too many layers of paint.
Start at the bottom and work your way up the supply of heat by the flame on the color, until it bubblesand makes a small area. Then remove the flame. Scraping off the softened paint with a stripper knife on flat surfaces or a shave hook for moldings and corners. When the stripping is finished, grind the wood by hand with sandpaper.
Of course, the best and most valuable instrument, rather hard to find as many willing to help friends and family members. Do you have enough of these you do not exercise can work, but my beer and pizza.
Danos tu comentario
Post a Comment