A quick introduction to the process of painting your Concrete Floor

Garage and concrete floors can be made to look neat and tidy, from painting also continued. This is the right material, epoxy paint or coating. This can sometimes be difficult to prove, but can with the right technique, you do the work light.

Here is how you paint your garage and concrete floor with epoxy paint:

· Complete Cleaning.

Make sure that you sweep or blow away dirt and loose debris from the area to be painted. Similarly, clean fully theArea of dirt, leaves, dirt and other materials that come through the garage door down your soil could again.

After sweeping, you have to wash the entire surface to be coated with a pressure washer. Preferably use the 2500 to 3500 psi with. It is important, but to be extra careful when pressurized water cut into the concrete. If you do not have a pressure washer, you can easily rent from rental centers.

For areas that are stronggreased and heavy residues exist, a degreaser solution can be applied to the surface. Scrub thoroughly after use with your pressure washer.

· Check your concrete floor.

It is very important to check and examine closely the surface. In this way, you may be able to crack to find the low or high spots and other damage or defects to the surface. You need to repair it, if you want to achieve the best results.

Able for very fine cracks, fill epoxy coating andthis binding. If you experience but larger cracks, jagged or deep cracks, you need to crack filler or use this patch with epoxy / concrete patching kit. It may also be necessary to grind the concrete. For small stains on the concrete floor, epoxy patching compound can be made, and putty mix on the surface.

· Etch your concrete floor.

After pressure washing, degreasing, if necessary, and undertaking necessary repairs in unevenAreas, you need to etch the concrete floor. This is necessary to bind the epoxy floor coating that can be used to the underlying concrete floor.

In the same amount of hydrochloric acid and water mix, then distribute them over the entire surface of the concrete floor. Let stand for 20 minutes, after which the soil with water completely clean and clear water until all acid has been washed away.

· Mix your color.

You need to know how tomix epoxy paint. For a 2 - gallon mixture of epoxy resin, pour the same amount of "Part A" and "Part B" to a clear 5-gallon plastic bucket. Use a Jiffy Mixer or MIXING PADDLE at a low speed of 1 / 2 "drill mix. Mixing on the ground and lift the paddle mixer, or never or out, as this will instill air into the mixture. The mixture may be made only for 3 to 3 ½ minutes, no more and no less.

· Applying your epoxy coating

You begin your color from the furthest point from the applicationDoor (s), so with a brush. They paint their way out of the garage to keep you from walking in wet paint and move materials, and not destroy it, release the color. In the first coating, epoxy resin for wet just wet epoxy resin is coated to the entire surface. Do you have your painting in small portions, so that the epoxy will not dry out easily. In order for the 2nd Coating apply, wait 2 to 3 hours until the first coat is already dry.

Since the right to work and appropriate material is used, your garageSoils do not long lasting satisfaction.

merchant processing marketing research Use stock for Business