How to apply concrete floor

Specifically, it is practical, robust and has been frequently used in the construction of buildings from the early Romans. But without a protective or decorative coating on concrete patios, driveways, sidewalks and garage floors are not very attractive. In fact, more than likely, they are colored, boring, boring, maybe even ugly.

Today, many homeowners and do-it-yourself will discover, through the use of Top Secret Coatings concrete coatings, the gray, coldThe outer panels can take a unique look and fashion that not only owners of houses and apartments, in particular, reflects the taste, but not slippery, add color and texture to a new house or more.

A porch or patio can be one of the most useful outside of your home if covered with an attractive concrete, removed all the excess waste and a bit 'of thought as landscaping the area. Unfortunately, these areas are too often covered with bland concrete which as well as look moreboring and dull, may have developed cracks or patches of moss, grease, oil, etc. over time. Restoring such areas to a place he would be proud, for entertainment, dining al fresco or just relax like a great river task may seem to be used. If the concrete is severely cracked and uneven surface, usually found in it no choice but to rip it up and then it was. Here are a couple of thoughts coatings tested before going ahead with plans for your specific application.

1. If yourFloor inside the house, a little control, he decided to base coat before you. Is the concrete damp? There is standing water? (If yes, then you have a problem bigger than an ugly floor!) Allow the concrete to dry before painting (this may take some time during the wet season!)

2. Clean the concrete with the TS 695 Etching Cleaner Rynolite. If there is any grease on the floor that you want to remove, sopainting or the paint does not stick before. To remove grease, cat litter, put up to absorb most of the oil, then scrub with TS 695 Etching Cleaner Rynolite. Rinse well and dry thoroughly the ground.

3. Sand or other loose or peeling paint residue with an orbital sander and 80 grit sandpaper. Harvest or residue. Then go on the ground cloth with a lap (a gauze strip for any hardware or homeHardware Store).

4. Use a paintable cement filler to repair cracks and holes and allow to dry completely before proceeding.

5. Now begins the painting process. You want the edges of the brush and roll the rest of the surface. Let each layer dry for 12-24 hours before recoating. Repeat the process with the second or third coats as directed.

Now you have created beautiful Top Secret Coatings concrete quality is thatcolorful and durable!

Lamps Buying Guide Led Flashlight