As new life to your concrete floor untreated Add

painted concrete usually seems to be very drab and uninviting and takes the overall picture of a room. You can turn the ground and with a fresh look with a little 'hard work and a fresh coat of paint and it will be years, a unique and beautiful finish to take the many. Painting your concrete floor is a great way to update garage look of, or in the basement a very affordable price. There is also a projectthat the average homeowner can complete with a little training and few tools.

Although painting concrete is usually more difficult to paint the plasterboard, it is still a relatively simple project. The tools and materials necessary to complete the job are a mask, gloves, glasses, paint, cement, concrete, primer, paint tray, brush, etching acid, tri-sodium phosphate (TSP), hydraulicCement, bucket, mop and broom. All these elements are already available at your local paint or hardware store.

To begin, clean the surface of the soil, such as land safely remove any grease or oil from. This is a very important step in preparation. It can absorb large litter stains.To oil or grease to clean the floor, mix the TSP cleaning solution according to manufacturer's instructions. Use yourMop, wipe the floor with a solution of TSP. After removal of the floor, rinse thoroughly and dry completely.

Use concrete of hydraulic cement to repair any holes or cracks in the cement and allow to set before the next step. If you can not find, hydraulic cement, you can also seal the concrete is specially formulated.

Mix with water according to the glazing manufacturer's instructions. Make sure that the mix Etching acid before start using it. Be sure to wear your safety goggles, gloves and a mask when etching acid and follow the manufacturer's instructions. Otherwise, take precautions to cause serious injury if the corrosive acid.

Place a small amount of corrosive acid on the floor and use the mop to spread the acid to a small area. Continue to apply the glazing prior to completing the recording of the entire> Plan. Once the etching acid had dried completely, use the Shop Vac to clean all the dirt and concrete carved from the earth.

After you have completely etched and cleaned the floor is high time that primer. Stir the primer thoroughly to make sure it is well blended. Pour in color from something outside primer. With the brush, the section covering the whole circumference of the room and around any other fixed objectsSpace. Once you cut the room into sections, use the roller and paint tray and a layer of primer on the bottom of four feet. Once the bottom is completely dry you can apply color concrete began. Use the same steps that the application of primer to apply the paint on the concrete floor. Drying time depends on what kind of paint you used for flooring. Make sure at least two layers is a good applicationConcrete quality color when painting concrete floors, although it seems that the extra layer unnecessary.

After you have completed painting the concrete floor, the polyurethane should be added for maximum durability and protection. Polyurethane coatings usually have very strong fumes, so be sure to wear a mask and keep the area well ventilated.

For the floor looks good for a long periodImplementation of a single layer of urethane maintenance every two years.

bedskirt Lamps Buying Guide