The application of epoxy coating on garage floor

Have recently been looking at many different soils and garages are really impressed with the epoxy coatings on rock and roll. The system of land, can new concrete garage floor of the boring life, a stick with a large granite-look finish. It is available in four different systems, make the most of two days, apply in full except for system 4, to be installed professionally. But if you have a system that you want to apply, you shouldGo to System 2

System 2 is 95% solid epoxy based, so it is better to work as a primer in water, it is easy to use and not with a primer, the smell is very mild and is not flammable. Some important requirements Versatile Building Products in the eye if they had developed this system:

The epoxy does not boil
The epoxy adheres permanently to the concrete.
Has a long window for the application of chipping flakes are to be given time toapply the epoxy and the first flakes of real panic sets in.
It uses about half the chips of granite elements larger than most other systems, which saves money.
Provides maximum protection, regardless of climate.
Tire is heat resistant to chemicals and more influenced by family.
It has a glossy top coat.
Can be used indoors or outdoors, and not yellow.
Quick to install and easy!

So when it comes to an epoxy resin system is doing, which are quickly and easily? Normally, the fullThe application requires two days because you did for drying time between the base and finish, although sometimes it can be done on a day when the weather is good and speed up the accelerator base coat drying time. Let's take a look at the basics of application roll Rock plans to a garage.

First you need to clean the impurities concrete surface with a degreaser to remove the surface and allow to dry for about 30 minutes at 60

Then, mixthe two epoxy components for 2 minutes with a paddle paint. roll evenly on the bottom floor garage with a roll smooth. Let the resin set for 20 minutes, but no more than 60 minutes before the broadcast of the chip.

With spiked shoes to walk on the epoxy resin and between small handful of flakes, threw him to the surface so that it looks too much like casting seeds of grass.

Leave your garage floor to dry overnight, then collect all the looseFlakes with a spatula, broom or blower. Then the entire surface with a flexible blade (squeegee go) to ensure that the surface is smooth.

The last layer is a quick drying and resistant polyurea garage floor makes the tires hot. To apply the finish, again mixing the two components together for 2 minutes. Pour the ground and uniformly distributed on a roll, first part a way to happy with the application, and then, 10 minutes, finally returning to90Ës Rolling on the first question. This ensures that the outer coat has a uniform thickness was applied. The best thing is divided into four areas in the garage and work one area at a time. You are about 45 minutes to finish, so you should not mix more than can be applied in this period. Garage floors are dry in 2-5 hours feels he can walk the next day, but must wait about 3 days before Garage the car.

Roll on Rock is knownfor the supply of most shiny floor and harder. You can also get the flakes of granite in a variety of colors, tan to black to green, blue and red and many other combinations. There is no doubt, epoxy garage floors are really in each district.

bedskirt waterheaterreviews bonahardwoodfloor